• Ready for use, no re-assembly required
• Patented folding mechanism
• Column width adjustable from 20-60cm (PAX60) or 40-100cm (PAX100) in 5cm gradations without changing the plywood
• Suitable for both square and rectangular columns
• Integrated chamfer angle fillets (sharp-edged version upon request)
• Only a single crane operation required to move PAX
• Easily and smoothly adjustable to any column heights through use of system heights 270cm, 120cm & 70cm and extension angles 20-40cm
• Simple transport - convenient handling - no small parts
• Synthetic shuttering board with steel edge-protectors
• Integrated crane-hooks
• All small parts are fixed
• Plastic-coated plywood 

PAX-Column formwork:
Adjustable in 5-cm-gradiations
(without changing the plywood),
both square and rectangular columns:

PAX 60/60: Adjustable from 20 - 60 cm
PAX 100/100: Adjustable from 40 - 100 cm
PAX 60/100 combined: Adjustable from 15 - 100 cm

Unfasten a row of bolts – open, move the bolts – and shut again – no dismantling! – clean the formwork and the PAX is prepared for the next shutering!

Extention should be made with opened formwork. First take out a complete row of bolts, than fix the two elements with. Take account, that the Pax cannot incline.

Positioning and moving of the "PAX" is made by crane.

For the vertical alignment of the "PAX" you have to use two struts.

From shutering hight of 3,5 m the formwork must be anchored.

max. concrete pressure:
PAX 60: 80 kN / m²
PAX 100: 70 kN / m²
combination: PAX 60 with PAX 100: 50 kN / m²
That means: PAX 60 - can be filled up to an height of 3,20 m without any restrictions!

For dismantle you just have to lower one row of bolts, then you can easy open the "PAX".

To avoid damaging of the plywood you have to transport the formwork on the whole.

spare parts for "PAX".