| | 
| | 
| | | Detailed view | | On the roof | | With rain water pipe | | |
|
Mounting:
Mounting of protection grid is done with help of supporting tubes and adjustable chain. One supporting tube per field + one support at the outset should be used.
Attention:
- It is necessery to use supporting tubes!
- It is not allowed to use adjustable chain alone!
- Supporting tubes should be fixed stricktly upright to timber beams of the roof with sufficient bearing capacity (cross section min. 6/10 cm) with at least 2 special screws for wood Ø 10 x 100 or with 6 nails 46/120! (ÖNORM B4007)
- The angle between roof protection and roof surface should not exceed 90°!
- The grid should be mounted only to the parts of the building with sufficient bearing capacity.
|
| | 
| | 
| | 
| Detailed view | | With bracket | | 1 m high | | 2 m high |
Mounting:
Protection grid is fixed at horisontal brace or double raling of Doppelgeländer scaffolding.
Attention: |
- The top edge of protection post should be measured in angle to roof surface, distance to roof surface should be kept min. 60 cm.
- Platform of catching scaffolding should be placed as near as possible to the edge of the roof, that is not more then 1,5 m from the edge.
- At the height of 2 m guardrail support is to be used .
- Toe boards are to be mounted!
| |
|
